Posted on Leave a comment

Improving BioFeedBack Accuracy Using Spooky2’s Baseline Function

Spooky2 uses their Baseline feature to help users get more accurate scan results, Baseline is a preset that automatically removes all electrical noise from the signal, Baseline is to help you determine when a sample is not found during a biofeedback scan A great tool for scanning signals, performing a baseline before scanning can greatly improve results. For example, some people may be concerned about Wi-Fi signals, electronic sounds, and other issues that may affect the scan results. Performing the Spooky2 Baseline function before scanning can help the system ignore these interferences and produce the most accurate scan results. The baseline is the standard GX biofeedback setup for contact mode, during the baseline the TENS pads used for biofeedback are glued together without the sample and scans are run to record ambient noise, so the sample will be the baseline scan and The only difference between the actual scan that follows, and the result is that unwanted interrupts are ignored.

Prepare with Spooky2 hardware :

  • USB data cable
  • Power Adapter
  • Spooky2 GeneratorX Pro
  • A Spooky2 TENS Pad
  • Spooky2 TENS Cable

Set up your Spooky2 properly and connect the TENS pads to your GeneratorX Pro, glue the pads together and turn on your GeneratorX Pro.

Prepare with Spooky2 software:

Go to the Presets tab > Biofeedback > GeneratorX > select the preset to run, we recommend the GX General Biofeedback Scan(C)-JW preset.

  1. Click Overlay Generator and click the correct generator port.
  2. Click Baseline in the Biofeedback Scan panel.
  3. Wait until the button next to “Baseline” turns green, indicating it’s done.

To perform a biofeedback scan, there are two easy methods that allow you to perform a biofeedback scan. You can choose one of them according to your needs:

  1. Place the two pads where you want to scan or problem areas of your body, such as placing them on either side of your waist to scan your kidneys.
  2. Place the sample into the sample digitizer. Click Scan to start the biofeedback scan.

Notice:

  1. Pulse scan cannot use baseline.
  2. Do not change any parameters after Baseline starts.

To learn more about proper procedure watch this video -> https://www.youtube.com/watch?v=bGa9aD6RtGY

Posted on Leave a comment

Spooky2 Frequency Healing for Hives (Measles)

Hot summer is the season of allergies and skin problems. Itchy skin and wheals appear in itchy places, which may be hives. Hives, also known as hives, are itchy, raised welts on the skin that are usually red, pink, or flesh-colored and sometimes sting or hurt. In most cases, hives are caused by an allergic reaction to a drug, food, or environmental irritant. In many cases, hives are an acute (temporary) problem that can be relieved with allergy medications. Most rashes go away on their own, however, chronic (persistent) cases, and hives associated with severe allergic reactions, require medical attention. Hives can be very uncomfortable and can interfere with sleep and daily activities, so if you suffer from hives, you should seek medical attention as soon as possible.

The skin appearance of hives varies by person and situation, and they can appear anywhere on your body. Signs of acute hives include:

  • Raised welts or bumps on the skin that may look reddish on light skin.
  • The hive turns white (the center of the hive turns white when pressed).
  • Itchy skin.
  • Swelling under the skin can cause puffiness (angioedema).
  • Painful swelling of the lips, eyes, and inside of the throat can also occur.

Symptoms of chronic urticaria and acute urticaria may look similar in many ways. They may be itchy, swollen raised sores that become shallow in the center with pressure. However, symptoms of chronic urticaria can be:

  • Change size and shape.
  • Appears, disappears, and then reappears at least every few days for extended periods of time, even months or years.
  • Occurs with heat, exercise, or stress.

Wounds from hives are caused by the release of immune system chemicals, such as histamine, into your bloodstream. Why chronic hives occur or how short-term hives turn into long-term problems remains unclear. Hives are caused by skin reactions and can also be caused by:

  • hot or cold.
  • Sunlight.
  • Vibrations, such as those caused by jogging or using a lawn mower.
  • Pressure on the skin from a tight belt.
  • Medical conditions such as thyroid disease, infections, allergies, and cancer.

Most of the time, hives go away on their own without treatment. Your healthcare provider may recommend medications and home care to help you feel better and reduce your chances of getting hives again. Common treatments for hives include :

  • Antihistamines: Oral (swallow a pill) or topical (applied to affected skin) antihistamines can relieve itching caused by hives and make the allergic reaction go away or lessen.
  • Allergy shots: For difficult-to-treat chronic hives, your healthcare provider may discuss monthly injections of medication to stop anaphylaxis.
  • Home remedies: To relieve hives, you can take a cool bath or shower, wear loose clothing, and apply cold compresses. Over-the-counter (OTC) hydrocortisone or antihistamine creams can relieve itching and swelling.
  • Spooky2 Frequency Therapy: (as below)

Unlike traditional treatments, Spooky2 Frequency Therapy uses frequency resonance to kill harmful pathogens in the body or restore cellular energy balance, Spooky2 is a great choice if you are looking for a safe and natural way to relieve hives while avoiding the side effects of prescription medications . You can run hives related programs directly in the software to help relieve hives, the following is an example of running a program through the Spooky2 remote mode, which allows you to get treatment anytime, anywhere:

First, connect the generator and remote control correctly. Second, open the Spooky2 software and select Shell (Empty) Presets > Remote > Killing (R)-JW. Then, go to the “Program” tab and enter the keyword “hives” to search for the programs you need, double click on the programs to load them into your generator. Finally, go to the “Control” tab, check “Overwrite”, select your generator port, and click the “Start” button to begin.

Finally, you can take Spooky2’s BioFeedback scan (BioFeedBack) to find the frequencies that work best for your body, and run the scan results to help relieve symptoms of hives.

Posted on Leave a comment

Spooky2 Frequency Healing Programs for Alleviating Recurring Nightmares

  1. If it is HSP (sleep paralysis), it may benefit from certain narcolepsy frequency programs.
  2. You can try the frequency programs of “Emotion” and “PTSD”.
  3. B1 deficiency can also cause nightmares, maybe some frequency programs of B1 with vitamin C and B complex is helpful.
  4. Kidney distress can also cause nightmares. Maybe some kidney normalization frequency program can be tried.
Posted on Leave a comment

Spooky2 Sound Frequency Healing for Acne

Acne, a skin condition that occurs when your hair follicles become clogged with oil or dead skin cells, can occur at any age and is most common in teens. Acne is often accompanied by whiteheads, blackheads or pimples, and depending on the symptoms, it can cause varying degrees of emotional distress and skin scarring. The sooner you start treatment, the lower your risk of developing this problem. There are several ways to help clear acne. Common treatments include benzoyl peroxide or salicylic acid. Taking vitamin A and antibiotics can also help. Healthy lifestyle habits, such as drinking enough water and avoiding greasy foods, are essential for relieving acne symptoms, as is regular cleansing of facial oils.

Listening to the following sound frequencies will help to soothe the mood, clear hair follicles and reduce inflammation and swelling, it is recommended to listen at least 2-3 times a day, keep the volume at a moderate level to prevent any hearing damage, make sure you drink enough lemon Water or purified water to flush out toxins from your body.

Posted on Leave a comment

Spooky2 Sound Frequency Healing for Alcoholism

It is said that more than 14 million adults in the United States are affected by alcohol addiction, which has developed into a serious threat to people, causing physical and psychological harm to people. Not all drinkers are alcoholics, but when a person loses control while drinking, he is likely to become addicted. Many factors, including relationships, anxiety, or genetic predisposition, have been linked to the development of alcoholism. Because of this, kicking the addiction can be challenging. You can find many ways to get rid of alcoholism, including exercising regularly or seeking professional help to change unhealthy behaviors at the same time, remember that the key to success is having a positive attitude.

Welcome to listen to the following sound frequencies will help to relax yourself, boost your mood and reduce alcohol dependence, it is recommended to listen at least 2-3 times a day, keep the moderate volume at a comfortable level to prevent any hearing damage, make sure you drink enough Lemon water or purified water to flush out toxins from your body.