Posted on Leave a comment

Spooky2 Frequency Healing for Relief of Lumbar Strain

A major contributor to lumbar or lumbosacral pain and soreness is lumbar strain, a chronic inflammatory disease that occurs when the muscles and ligaments in your lower back tear from their attachments. In addition to the overuse of the waist in manual workers and athletes, there are other possible causes, such as the following :

  • Sudden waist injury
  • Untimely or inappropriate treatment
  • related to climatic and environmental conditions

Symptoms of a lumbar spine strain include mild to extreme discomfort or pain in the lower area, especially after putting pressure on the tissues of the lumbar spine. The following are the most common symptoms of a lumbar spine strain :

  • localized lower back pain
  • Sudden muscle spasms in the lower back
  • Soreness when touching your lower back
  • difficulty standing or walking
  • Unable to bend over for a long time

To naturally prevent or control lumbar spine strain is a short rest after a slight lumbar spine strain will disappear. Ice packs and anti-inflammatory medications may also relieve pain from a lumbar strain. But if none of these methods work, be sure to seek medical attention immediately. The following are natural remedies for lumbar strain relief :

1. Avoid overwork and rest in time – the waist is the hub of various activities of the human body, overwork will inevitably lead to waist injury and lead to waist strain. Fortunately, most lumbar spine strains can be effectively relieved by taking a period of rest, so keep work and rest in each job.

2. Correct bad posture – Bad posture keeps the fibers and muscles of the lower back tight and puts undue pressure on the lower back constantly, such as bending over or sitting for long periods of time.

3. Exercise – Regular exercise can strengthen the lumbar muscles and prevent the occurrence of lumbar strain. These exercise programs for the lower back may include stretching exercises, back strengthening exercises and some low-intensity aerobic exercise.

4. Cold or warm compresses – Use cold compresses for the first few days to relieve pain and swelling, then switch to a heating pad to promote blood flow and relieve muscle tension, 15-20 minutes at a time, several times a day.

5. Lumbar Strain Relief with Spooky2 – Frequency therapy is an alternative treatment without any side effects and is a good choice if you intend to relieve lumbar strain naturally. Spooky2 offers a variety of lumbar strain relief modes, you can choose the one that best suits your situation. For lumbar strain we recommend using PEMF mode, first, go to the “Preset” tab and select “Shell (Empty) Preset > Coil (Generator Direct) – JW > Heal (R) – JW ( Shell ( Empty) Presets > Spooky Coil (Generator Direct) – JW > Healing (R) – JW ). Then, go to the “Program” tab and search for the keywords “muscle” and “pain” to find related Programs, and double-click the program you want. Programs for lumbar strain relief include: Pain Relief and Muscles to Relax. You can also add some other programs to this preset if you want in. Go to the Control tab, tick “Overwrite”, select your generator port, and click the “start” button to get started.

Posted on Leave a comment

Youtube Spooky2 Treatment Frequency for Thyroid Cancer

Thyroid cancer is when abnormal cells in the thyroid begin to divide and grow in an uncontrolled way. Although thyroid cancer can affect anyone, it is almost three times more common in women than in men, and if left untreated, it can spread to other parts of your body. Most cases of thyroid cancer occur without an apparent cause or risk factor, however, certain factors, such as radiation exposure, a low-iodine diet, and genetic defects, can also increase the risk of developing thyroid cancer. Treatment depends on the type of cancer you have and how far the cancer has spread, but removal of part or all of the thyroid is the preferred treatment for cancer tumors 1-4cm. Many patients also receive multiple treatments, including hormone therapy, radiation therapy, chemotherapy, or targeted therapy.

Welcome to the youtube frequency video below which will help relieve neck pain, sore persistent cough and difficulty breathing, it is recommended to listen to it at least 2-3 times a day, keep the moderate volume at a comfortable level to prevent any hearing damage and make sure you have enough of lemonade or purified water to flush toxins from your body.

Posted on Leave a comment

Principles of Quantum Detoxification

Quantum medicine starts from human cells, repairs and restores the energy field of the human body’s own cells, and does not take medicine or injections to improve the chronic diseases of the human body. For example, the detoxification principle that quantum technology acts on the human body has three steps:

Step 1 – Quantum is particulate and can easily penetrate cell membrane channels.

Step 2 – After the quantum enters the cell, it vibrates with high frequency, and the quantum can resonate with the water in the body, the electrons outside the nucleus and the magnetic field of the cell. Just like ultrasonic cleaning, the ultrasonic cleans the tartar on the teeth, while the quantum oscillation It cleans the toxins in the cells, free radicals in the blood vessels, liver toxins, blood toxins, etc.

Step 3 – high-frequency oscillation makes the toxins fall off and enter, metabolize and detoxify, and release free electrons and negative ions at the moment when the quantum contacts with the water in the body, which instantly turns the water into tiny molecular clusters. The force is particularly strong, so that the oscillating toxins can be excreted from the body through the body’s own functions, such as urination, stool, and sweat.

Posted on Leave a comment

PEMF Therapy for Digestive Problems

Common digestive disorders include gastroenteritis, heartburn, constipation, and irritable bowel syndrome, which may be accompanied by symptoms such as stomach cramps, diarrhea, vomiting, and bloating. Especially in hot weather, such as summer, as the temperature rises, the digestive system tends to become slower and weaker, which can easily lead to gastrointestinal dysfunction. To avoid digestive problems and maintain smooth digestion, you can refer to the following suggestions :

  1. Choose healthy foods – stomach-friendly foods like fresh fruits, vegetables, beans, whole grains, and legumes are nutritious for maintaining a healthy digestive system. Also, remember to add fiber to your diet. When your digestion is slowed down by the summer heat, fiber will help it by keeping the process smooth and easy.
  2. Stay hydrated – Drinking plenty of water helps balance fluid loss in calories and resolves digestive issues by improving nutrient absorption. You can also drink coconut water to help neutralize acid levels in your stomach and reduce calories.
  3. Eat smaller meals more often – In addition to eating the wrong foods, overeating can also lead to indigestion. Therefore, be sure to consume small amounts after regular intervals. Doing so won’t make you hungry or put an extra load on your digestive system.
  4. Probiotics – Probiotics contain gut-friendly bacteria that can ease the digestive process and improve health. Therefore, adding yogurt to your diet is a beneficial option as it is the best source of probiotics.
  5. Exercise regularly – Exercise improves digestion, regulates bowel movements, and enhances overall health. Allocate some time each week to do some cardio, such as yoga, swimming, cycling, running, etc.
  6. PEMF Therapy – PEMF therapy works at the cellular level to improve cellular condition and enhance blood flow, aiming to reduce pain and inflammation while maintaining your overall health and well-being. The gastrointestinal tract is made up of cells, just like the rest of the body, and when PEMF therapy is applied to the gastrointestinal tract, it can help maintain a healthy gut balance and create an environment for cells and microbes to thrive. So, improve your overall digestive system and help activate your metabolism.

Help with Digestive Problems with MiraMate Mini Magic

MiraMate Mini Magic is one of the most advanced and trusted PEMF devices praised by many customers around the world, it is painless, effective and easy to use. For digestive problems, we recommend that you apply Mini Magic‘s coils to the abdomen where you feel uncomfortable, such as placing one above the belly button and the other on the top of the stomach, more than three hours a day, according to your living habits, you can Separated for about half an hour to a few hours at a time, the PEMF frequency will go deep into your stomach and intestines to help with any digestive issues and relieve pain, it won’t completely eliminate all pain in a short period of time (within a few days), but Should lighten considerably, and with regular use, it may help eliminate it within a few months, good luck!

Posted on Leave a comment

Spooky2 Frequency Healing to Scoliosis

Scoliosis is an “S” or “C” shape of the spine, with uneven shoulders when noticeable Most develop during adolescence. Mild scoliosis generally does not affect our daily life, but when it develops to a severe stage, treatment is necessary, because severe scoliosis can even cause breathing and movement difficulties. Its symptoms include the following:

  • significantly curved spine
  • uneven shoulders
  • uneven hip, arm, or leg length
  • Leaning the whole body to one side
  • Ribs of different heights
  • slow neural activity
  • Most people with scoliosis may have back pain.
  • When twisting the torso, you will face limited mobility and tightening of body organs such as the stomach and intestines, which further leads to constipation.
  • Idiopathic scoliosis may even affect the lungs.

The cause of most scoliosis cases is unknown, and possible factors are environmental and genetic. The causes of scoliosis can be divided into three categories:

  1. Idiopathic scoliosis, which accounts for about 80 percent of all cases, cannot be prevented and is not considered a consequence of poor posture, exercise, or diet. The reason for this is unclear.
  2. Congenital scoliosis is present from birth and is caused by spinal bones that do not form properly in the womb and can occur anywhere on the spine.
  3. Neuromuscular scoliosis, which usually progresses faster than others, is considered an underlying neurological or muscular disorder, such as cerebral palsy, muscular dystrophy, and spina bifida.

Suggested treatments for scoliosis include the following:

  • Observation – Many children with scoliosis may not need treatment as the curve may improve as the child grows, however, if you are concerned about the risk of the curve getting worse, it is best to try every four months (for children) and every five years ( adults) have a regular check-up.
  • Braces – braces are only effective for skeletal immature patients, older children can wear braces to prevent curves from worsening as they grow, braces should be checked regularly to ensure they always fit perfectly, for best results, These patients need to wear the brace for 16 to 23 hours a day until the bone stops growing.
  • Surgery – Generally, surgery is recommended when the spine is more than 40 degrees curved and there is a possibility of deterioration, however, these procedures take a long time to recover and may have side effects such as jointing of discs, joints and ligaments inflammation.
  • Alternative Therapy – Frequency treatment with Spooky2 is an alternative therapy with no side effects and is a good option if you intend to improve your scoliosis naturally. Spooky2 has the world’s largest frequency database with over 35,000 programs dedicated to providing you with accurate and beneficial frequencies to address imbalanced energy and pain. When relieving scoliosis symptoms, you can use appropriate frequency programs and patterns to improve your bone health and help relieve symptoms.

For example, to operate Spooky2’s remote mode, go to the “Presets” tab, then select “Shell (Empty) Presets > Remote > Healing (R) – JW) “, go to the “Program” tab, search for “scoliosis”, then select the program you want, and finally, go to the “Control” tab, select your generator port, tick “Overwrite” and click the “Start” button to get started.