Tag: Healing

Posted on by

Steps to Make Colloidal Silver with Spooky2

Colloidal silver, usually in liquid form and used in medicine for a long time, attaches to proteins on bacterial cell walls and disrupts their membranes; silver ions can penetrate into cells, where they interfere with bacterial metabolism process, and damage their DNA, eventually the bacteria will die. The following steps are to make nanoparticulate colloidal silver with Spooky2, the silver particle size will be very small to increase the effectiveness of the colloidal silver.

Step 1: Prepare those devices

  • Spooky2 XM Generator or Spooky2 GeneratorX x1 (includes power adapter, USB cable and BNC/Alligator cable)
  • Spooky2 Boost v3.0 x1
  • Silver Rod x2
  • Magnetic stirrer x1
  • glass or ceramic container
  • distilled water

Step 2: Washing

Thoroughly clean the Spooky Silver Rod and Container, rinse with distilled water and dry with a napkin.

Step 3: Hardware Connection

  1. Fill the container with distilled water (do not use tap or filtered water, these will almost certainly contain unwanted impurities and chemicals; it is normal for your silver rod to turn grey, however, if your water has impurities, it will turn black; Hot water will speed up the process, but the particle size will increase.).
  2. Place two clean, shiny silver rods in the water, making sure the rods are at least an inch or more apart.
  3. Place the container on the magnetic stirrer and insert the small plastic stirrer.
  4. Clip the alligator clip to the silver rod and plug the other end of the cable into the Spooky2 Boost’s colloidal silver port.
  5. Cover the container with a lid, such as plastic wrap, to keep dust or dirt out.
  6. Connect the generator to the computer’s USB port and plug in the power adapter.

Step 4: Software Setup

  1. Open the Spooky2 XM (GX) generator and launch the Spooky2 software on your PC.
  2. Click Utilities in the top menu. Select Colloidal/Ionic Silver Calculator and a new window will pop up.
  3. Enter parameters to calculate when you should run the colloidal silver generation program.
  4. Use the “By Calculation” method to calculate the duration of the program, you can change any field in the calculator, enter the volume of distilled water, for example 500 ml; enter PPM, which is the desired parts per million, we recommend this Set to 20PPM, which is the strength of most commercial colloidal silver; enter the current, if you don’t have the tools to measure the current or don’t know how to measure it, just enter 0.2mA. This is a rough average estimate, assuming you have two 9 AWG rods one inch apart immersed in distilled water to a depth of 12 inches, the total time required to make colloidal silver will automatically be displayed next to the duration in minutes , hours, and days are given in units.
  5. Exit the calculator and go to the Presets tab.
  6. Open the Miscellaneous catalog and select Preset Colloidal Silver Generation – JW Preset.
  7. Go to the Programs tab and enter the calculated duration (750 minutes) you received from step 3 into the Dwell Multiplier field.
  8. Go to the Control tab, tick “Override generators”, select a generator and run the program.
  9. Turn on the magnetic stirrer. Adjust the gentle movement of the water, speed is not the key, don’t rush the manufacturing process, the slower the better.

Result: When the colloidal silver solution is ready, it may be pale yellow/gold, which indicates that the particle size is very small, and you can shine a laser in the solution and observe a visible red line indicating tiny silver particles in suspension. Store colloidal silver solutions in dark glass containers, plastic and UV rays from the sun can cause silver ions to lose their positive charge and clump together, impairing their healing abilities.

Posted on by — Leave a comment

Why is the Spooky2 Biofeedback Scan Result Different Every Time?

A recent Israeli study, “The amount of bacteria carried by the average person,” found that the human body has an average of 30 trillion human cells and 39 to 50 trillion bacterial cells, and it is unbelievable that the vast majority of these bacteria are Harmless, some beneficial and actually vital to life, 70% of our immune system is made up of this “good bacteria”.

All human bacterial cells – good, bad and harmless – operate at frequencies between 76,000Hz and 880,000Hz. When you perform a frequency sweep, you enter the entire range of amplitudes covering frequencies. At the same time as your first scan, many different bacteria are likely to be killed, and the frequency will cause a reaction in your body, and the scan will record their frequency. After that, you treat according to the scan results, you will kill them all, and your next scan will not find them.

Another complicating factor is that due to time, each scan can only look for the top 10 hit frequencies in your body, however some peripheral bacteria seem to die “noisier” than others – we call it These species are the “loudest screamers” because they elicit an extreme response in the body, and since biofeedback scans cannot distinguish between harmful and innocuous, the Spooky Pulse or GX will record all of them. On the other hand, nasty stealth pathogens have evolved ways of evading the immune system so they go unnoticed, and as a result, their frequencies may not be picked up and recorded at first. With each scan, you may find another 10 “loudest screams,” and even these may not include frequencies relevant to your disease.

To do this, you must first remove all the loudest noise makers – peripheral bacteria by repeating the scan, and when this is done, there will be no more “loudest screams” to drown out these dying viruses and bacteria, Your results will now include their true frequencies. There are other factors involved, for example, killing bacteria always releases the virus that infects them as well as toxins, and some bacteria that survive the first scan may turn into “cysts” or other forms that are less likely to kill the next time . Killed parasites release bacteria, viruses, toxins and heavy metals. This means that the frequency of your flashover is in a state of constant change, and it is different from moment to moment. Given all of this, it’s unreasonable to expect repeatability in sequential scans, and it’s unrealistic to believe that one or two scans will solve all your problems, so it’s unrealistic to scan successive layers of pathogens and trace the source, like peeling layer by layer. onion. That’s why our recommended method is to scan, use your follow-up scan results 7-8 times in contact mode, then scan again, and continue this way until you reach your health goals.

Posted on by — Leave a comment

Pulsed Electromagnetic Field Therapy for Endometriosis

Endometriosis is one of the most common gynecological diseases, affecting up to 10% of women worldwide, and if left untreated, the condition can wreak havoc on their lives. Endometrial tissue thickens, breaks down, and bleeds with each menstrual cycle, and over time, the tissue that has broken down cannot leave your body and becomes trapped in your pelvis, causing irritation, scarring, adhesions, severe Pain, fertility problems, etc. There is no cure for endometriosis, but it is encouraging that more and more studies are demonstrating the positive effects of pulsed electromagnetic field therapy for endometriosis. Today, pulsed electromagnetic field (PEMF) therapy is used as a safe and non-invasive treatment for endometriosis, helping to relieve pain and manage symptoms.

Although pain is common during the menstrual cycle, women with endometriosis experience more severe pain than usual, and for women affected by endometriosis, this pain often causes them Weak and prevent them from going about their daily lives. It has been established that the pain experienced by patients with endometriosis is caused by swelling and inflammation, which arise from abnormal cells in the lining of the uterus.

Ectopic lesions can also lead to an estrogen imbalance, causing further inflammation. PEMF therapy can lower estrogen levels, balance hormones, and aid in the treatment of endometriosis. In addition, many women with endometriosis often suffer from chronic fatigue. PEMF therapy can increase ATP levels and help cells increase energy by up to 500%. PEMF pulsed electromagnetic field therapy can also open membrane channels to allow nutrients to enter cells, eliminating waste products from cells easily and quickly. In this way, PEMF therapy can benefit women with endometriosis, helping them reduce chronic fatigue and improve their quality of life.

PEMF therapy can help reduce inflammation, promote healing, relieve pain, and increase oxygenated blood flow and circulation. The most well-known health benefit of PEMF therapy is that it effectively reduces inflammation, pain, and swelling throughout the body. Miramate’s Big Magic Pad is one of the most advanced PEMF devices on the market, designed for long-term treatment. We recommend that patients with endometriosis use the Big Magic pad for more than 3 hours a day, stimulation should be applied to the pelvic area, lower back area and abdomen.

Please follow the link below to order -> https://www.miramate.com/?ref=56 。

Posted on by — Leave a comment

Introduction of “Zero Limits”

First of all, let’s introduce Dr. Ihaleakala Hew Len, who worked in a mental hospital that cured all the patients without actually visiting or consulting any patients, after examining the patient’s files, then Dr. Hew Len began to “Clean” himself. When he cleaned himself, his patients miraculously recovered. It sounded impossible, but it really happened on Hew Len.

How to explain Hew Len’s experience? Here comes the topic of “zero limits” which is a Hawaiian practice of reconciliation and forgiveness, “Ho’oponopono” sounds like a mantra, from the moment you recite it, begins your magical journey of awakening humanity, and it reveals four specific simple phrases that change your life to awaken the power of humanity.

Four phrases repeated by “Zero Limits are : Sorry, Forgive Me, Thank You, I Love You, every time you read these four mantras, you subconsciously communicate clearing your memory and your inner self message, you pass Eliminate the corresponding inner memory to solve any problem, memory clearing does not mean you need to forget anything from the past, but it will clear the pattern of your past behavior cycle, after cleaning, you will adapt to a new, more natural perspective Going to face any person or situation in your life, miraculous results, other people will change their attitude towards you, that’s the amazing power of Zero Limits, using the tools you need to break free from obstacles and open up infinite possibilities for yourself, including treatment recovered from illness.

If you want to learn more about “Zero Limits”, I introduce you to the book “Zero Limits: Hawaii’s Secret System of Wealth, Health, and Equality,” by author Joe Vitale’s previous book, “Zero Limits” developed a unique self-help breakthrough focused on helping overworked, stressed people overcome obstacles and achieve their goals. It provides new stories, explains new processes, and reveals the fourth stage of awakening, starting from zero and starting where zero limits left off. This is a book explaining how a Hawaiian secret method called ho’oponopono helps people experience the secret system of health, wealth, happiness, and equality.

Posted on by — Leave a comment

6 Ways to Boost Your Immune System Without Medicine

The immune system is responsible for fighting off pathogens, including bacteria and viruses, and it is especially important to build and maintain a strong immune system to keep you healthy. Here are five science-based ways to build and maintain a strong, healthy immune system without the use of drugs.

1. Spooky2 frequency device boosts immune system

The immune system is an essential network of the human body that protects people from bacteria and microorganisms every day. It consists of special cells, proteins, tissues and organs that protect the body. A strong and healthy immune system can defeat invading pathogens and bacteria. On the other hand, problems with the immune system can lead to various diseases. If you’re thinking about boosting your body’s immune system to help your body fight, you can try the Spooky2 preset for Immune System Stimulation, found under the Miscellaneous Directory, and we recommend running it with a detox program for four weeks. If you already have autoimmune problems, please do not use it as it may stimulate your immune system and have unpredictable effects.

2. Pulsed Electromagnetic Field Therapy

According to published clinical studies, PEMF therapy is a natural, non-invasive and safe way to effectively boost an individual’s immunity.

PEMF has been shown to increases oxygenation, which will help keep cells healthy and functioning at optimal levels; and to stimulates mitochondria to produce more ATP, the body’s energy molecule. ATP works like gasoline for a car, which will help fuel the body’s systems to continue normal cellular functions. PEMF can also reduce inflammation helps cells recover faster and stay healthy, thereby limiting the spread of infection from cell to cell.

MiraMate Big Magic is one of the most advanced PEMF devices on the market. It replicates the frequency of the Schumann resonance, a magical frequency that can naturally benefit our physical and mental health without any side effects. If you’re looking for a natural way to boost your immune system, MiraMate Big Magic is just what you need.

3. Food

A healthy diet is the key to a strong immune system, and eating more vegetables, fruits, legumes, whole grains, lean protein, and healthy fats is always a good habit. In addition to giving your immune system the energy it needs, a healthy diet can help ensure you’re getting adequate amounts of micronutrients to support your immune system, including vitamins B6, C, and E.

4. Exercise

Exercise isn’t just about building muscle or maintaining flexibility, it’s also an important part of staying healthy and supporting a strong immune system. Physical activity regulates your overall blood circulation, making it easier for immune cells and other infection-fighting molecules to move throughout your body. . Research shows that 30 minutes of moderate-to-vigorous exercise a day can help boost your immune system.

5. Positive emotions

During times of stress, especially frequent and prolonged chronic stress, your body responds by initiating what’s called a stress response, which is designed to help you deal with an impending stressful situation. Unfortunately, this reaction also suppresses your immune system and increases your chances of getting an infection or getting sick. Everyone’s stress is different, and so is how we manage it. Whether it’s taking deep breaths, meditating, or practicing prayer, you should be familiar with at least one method that can help you stay positive.

6. Sleep

When you sleep, a lot of important cellular activity takes place in your body. For example, important anti-infective molecules are produced while you sleep. Getting enough sleep is important to give your immune system the best chance at fighting off infection and disease. Research has also shown that people who don’t get enough sleep are more likely to get sick after being exposed to the virus.